Molecular Sieve 5A
You are here: Home » Products » Molecular Sieve » 5A Molecular Sieve » Molecular Sieve 5A

Molecular Sieve 5A

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button
Availability:

Adsorbents zeolite molecular sieve 5a 1.7-2.5mm 3-5mm desiccant for removing water, CO2, H2S from sour natural gas streams


Adsorbents zeolite molecular sieve 5a 1.7-2.5mm 3-5mm desiccant for psa hydrogen purification

XC3003 is an alkali metal aluminosilicate with a pore size of 5 Å; it features a calcium-exchanged Type A crystal structure. Capable of adsorbing molecules with diameters smaller than 5 Å—such as H2O, CO2, H2S, NH3.

Chemxin XC3003 is characterized by high selectivity, large adsorption capacity, and rapid adsorption kinetics, making it suitable for a wide range of applications, including petrochemical processing, gas production, and the dehydration of lithium battery electrolytes.


Technical Parameter:

Model XC3003
Color Light gray
Nominal pore diameter 5 angstroms
Shape Sphere Pellet
Diameter (mm) 1.7-2.5(8*12 mesh) 3.0-5.0(4*8 mesh) 1.5-1.7(1/16 inch) 3.0-3.3(1/8 inch)
Size ratio up to grade (%) ≥96 ≥96 ≥96 ≥94
Bulk density (g/ml) ≥0.68 ≥0.68 ≥0.66 ≥0.66
Wear ratio (%) ≤0.20 ≤0.20 ≤0.40 ≤0.40
Crushing strength (N/PC) ≥30 ≥100 ≥30 ≥50
Static H2O adsorption (%) ≥21 ≥21 ≥20.5 ≥20.5
Static Hexane adsorption (‰) ≥12.5 ≥12.5 ≥12.5 ≥12.5
Water content (%) ≤1.5 ≤1.5 ≤1.5 ≤1.5
Typical Chemical Formula

0.7CaO . 0.3Na2O . Al2O3 . 2SiO2 . 4.5H2O (SiO2 : Al2O3 ≈2)

Typical Application

a)Pressure Swing Adsorption (PSA) units for O2, H2, CO2 production.

b)Petroleum refining, separation of normal and iso‑paraffins, and dewaxing processes.

c)Purification in air separation and synthetic ammonia units: dehydration and removal of CO2.

d)Natural gas drying, including dehydration, CO2 removal, and desulfurization.


Regeneration:
Chemxin molecular sieve Type 5A can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes.
To remove moisture from a 5A molecular sieve, a temperature of 250-300°C is required. A properly regenerated molecular sieve can give moisture dew points below -60°C, or mercaptan or CO2 below 2 ppm.
The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process.
Size:
5A - Zeolites are available in beads of 1-2 mm(10x18 mesh), 2-3 mm(8x12 mesh), 2.5-5 mm(4x8 mesh) and as powder, and in pellet 1.6mm, 3.2mm.
Attention:
To avoid damp and pre-adsorption of organic before running, or must to be reactivated.


Adsorbents zeolite molecular sieve 5a 1.7-2.5mm 3-5mm desiccant for psa hydrogen purification图层12


Adsorbents zeolite molecular sieve 5a 1.7-2.5mm 3-5mm desiccant for psa hydrogen purification

Previous: 
Next: 

Product Category

Contact Us

Add : 4F, Changshanghui Building, No.31 Shengxing Street, Panyu District, Guangzhou city, Guangdong province, 511400 China
Tel : +86-20-39185057
Hand phone:+86-13538985706
E-mail : info@chemxin.com

CHEMXIN

Adsorbent Specialist for 20+ Years
Best Adsorption Solution for You Only

PRODUCTS

CONTACT US

  Address:4F, Changshanghui Building, No. 31 Shengxing Street, Panyu District, Guangzhou City, Guangdong Province, 511400 China
  Phone: +86-13538985706
  E-mail:info@chemxin.com
Copyright Guangzhou Chemxin Environmental Material Co.,Ltd. Support by Leadong. Sitemap