Division and Core Characteristics of the Three Adsorbents1. Silica Alumina Gel (for the first layer of coarse desorption, on the inlet side)Advantages: Maximum water absorption capacity at normal temperature and high humidity (25% - 30% mass water absorption rate), low regeneration temperature (150

DMF is widely used as an industrial solvent and may require moisture removal before reuse in certain applications. Molecular sieves are widely used adsorbents for drying solvents because of their ability to selectively adsorb water.For DMF drying, choosing a suitable molecular sieve type is an impor

Molecular sieves, silica gel and ceramic balls are filled inside the adsorption dryer (twin-tower TSA/PSA dryer). Their functions are different: Ceramic balls do not absorb water, while silica gel and molecular sieves are responsible for adsorption and dehydration.The raw material humid air enters t

3A molecular sieve is a potassium-type A-type silicoaluminosilicate crystal, with its core characteristic being an exact pore diameter of 3 angstroms (0.3 nm). The dynamic diameter of water molecules is approximately 2.65 Å, allowing them to freely enter the pore channels; hydrocarbons such as ethyl