Ceramic Berl Saddle for portable air stripper for chemical plants and oil refineries
You are here: Home » Blogs » Ceramic Berl Saddle for portable air stripper for chemical plants and oil refineries

Ceramic Berl Saddle for portable air stripper for chemical plants and oil refineries

Views: 0     Author: Site Editor     Publish Time: 2023-10-25      Origin: Site

6-2

The ceramic berl saddle are overlapped with each other in the tower, forming an arc airway with interlocking structure, which is conducive to the uniform distribution of gas-liquid flow and the reduction of resistance. Compared with ceramic raschig ring, berl saddle has better performance, but it is easy to overlap, and it is easy to cause channel flow and high flooding point at the overlap.

The berl saddle is completely open, both inside and outside, and the fluid is equally distributed on both surfaces. Another characteristic of berl saddle is that when stacked in the tower, the pressure on the side of the tower wall is smaller than that of ring packing.

However, because the surface configuration on both sides is the same, the stacking filler is easy to overlap, thus reducing the exposed surface.

Air stripping apparatus. An air stripping apparatus as presented in Figure 1 & 2

未标题-1

The stripping chamber packing material shall be beryl saddles between 6 to 9 millimeter size. The depth of the packing material will be 26 inches.

E: info@chemxin.com

www.chemxin.com

CHEMXIN

Adsorbent Specialist for 20 Years
Best Adsorption Solution for You Only

PRODUCTS

CONTACT US

  Address:4F, Changshanghui Building, No. 31 Shengxing Street, Panyu District, Guangzhou City, Guangdong Province, 511400 China
  Tel:+86-20-39185057
  Phone: +86-13538980736
  E-mail:info@chemxin.com
Copyright 2022 Guangzhou Chemxin Environmental Material Co.,Ltd. Support by Leadong. Sitemap