Industrial silica gel orange to green indicating desiccant 2-4mm for drying
You are here: Home » Products » Silica Gel » Industrial silica gel orange to green indicating desiccant 2-4mm for drying

Industrial silica gel orange to green indicating desiccant 2-4mm for drying

Share to:
Availability:
Quantity:

Industrial silica gel orange to green indicating desiccant 2-4mm for drying type A white orange blue silica gel

Product Description

Industrial silica gel orange to green indicating desiccant 2-4mm for drying type A white orange blue silica gel  


Color: faint yellow.Chemical molecular formula:mSiO2.nAl2O3.XH2O.

Chemically stable,flame-resisting.Insoluble in any solvent except strong alkali or hydroelectric acid. In comparison with fine-pored silica gel ,the adsorption capacity of HY-H silica alumina gel is quite the same when used at low relative humidity ,(e.g.RH=10%,RH=20%),while its adsorption capacity at high humidity is 6—10%higher than that of fine-ported silica gel. Its thermal stability is over 150 higher than that of fine-pored silica gel (200 ).Ideally suited for use as absorbent and variable-temperature absorbent.

Application

Mainly used of separating light hydrocarbon from natural gas, the product can reduce dew point of hydrocarbon to produce natural gas gasoline , drying natural gas at the same time .Add 20% (wt) HY-W as the protective layer if water drip exits in separation system. In addition,it can be used as common dryer ,catalyst and its carrier ,variable –pressure adsorption separation agent (PSA). As variable-temperature adsorption separation agent (TSA) at higher temperature, it performs especially suitable.


Technical Parameter:

Appearance transparent or translucent glass-like pellet or lump
Application Mainly used for drying water-proof,can also be used as catalyst carriers, adsorbents, separators and variable-pressure adsorbents, etc.
ITEM
Typical values
Adsorption capacity RH=20%,% 11.2
RH=50%,% 29.2
RH=90%,% 37.6
Loss on heating,%       1
thermal conductivity KJ/m.hr.°c 0.63
average pore diameter nm 2.0-3.0
pore volume ml/g 0.35-0.45
Specific surface area m²/g 650-800
specific heat KJ/kg.°c 0.92
PH value 4
Specific resistance,Ω .cm 5630
Silica %   98.5
ratio of qualified spherical granules,% 90
Bulk density, g/L 784
Sizes:0.5-1.5mm, 0.5-1mm, 2-4mm, 2-5mm, 4-8mm
[Packaging] 15kg per compound bag or 300 kg. Per container bag.
[Note] The moisture content, packing and size may be customized per specific requirements.
Packaging & Shipping

Industrial silica gel orange to green indicating desiccant 2-4mm for drying type A white orange blue silica gel  

Company Information

Industrial silica gel orange to green indicating desiccant 2-4mm for drying type A white orange blue silica gel  


Industrial silica gel orange to green indicating desiccant 2-4mm for drying type A white orange blue silica gel  



Industrial silica gel orange to green indicating desiccant 2-4mm for drying type A white orange blue silica gel  

Contact Us

Industrial silica gel orange to green indicating desiccant 2-4mm for drying type A white orange blue silica gel  

Previous: 
Next: 

Product Category

Contact Us

Add : 4F, Changshanghui Building, No.31 Shengxing Street, Panyu District, Guangzhou city, Guangdong province, 511400 China

Tel : +86-20-39185057
 
Hand phone:+86-13538980736

E-mail : info@chemxin.com

Skype : xintao08

CHEMXIN

Adsorbent Specialist for 20 years
Best Adsorption Solution for You Only

PRODUCTS

CONTACT US

  Address:4F, Changshanghui Building, No. 31 Shengxing Street, Panyu District, Guangzhou City, Guangdong Province, 511400 China
  Tel:+86-20-39185057
  Phone: +86-13538980736
  E-mail:info@chemxin.com
Copyright 2022 Guangzhou Chemxin Environmental Material Co.,Ltd. Support by Leadong. Sitemap