Chemxin 13X Type Molecular Sieve Zeolite Adsorbent For Dehydration and Desulfurization of LPG Streams
You are here: Home » Products » Molecular Sieve » 13X Molecular Sieve » Chemxin 13X Type Molecular Sieve Zeolite Adsorbent For Dehydration and Desulfurization of LPG Streams

Chemxin 13X Type Molecular Sieve Zeolite Adsorbent For Dehydration and Desulfurization of LPG Streams

Share to:
Availability:
Quantity:

Chemxin 13X Type Molecular Sieve Zeolite Adsorbent For Dehydration and Desulfurization of LPG Streams

Product Description

Chemxin 13X Type Molecular Sieve Zeolite Adsorbent For Dehydration and Desulfurization of LPG Streams  


Chemxin Molecular Sieve 13X is the sodium form of the type X crystal and has a much larger pore opening than the type A crystals. It will adsorb molecules with a kinetic diameter of less than 10 Angstrom (1.0 nm) and exclude those larger. It also has the highest theoretical capacity of the common adsorbents and very good mass transfer rates. It can remove impurities too large to fit into a type A crystal and is commonly used to separate nitrogen from oxygen.


Technical Parameter:

Model 13X
Color Light gray
Nominal pore diameter 10 angstroms
Shape Sphere Pellet
Diameter (mm) 1.7-2.5(8*12 mesh) 3.0-5.0(4*8 mesh) 1.6(1/16 inch) 3.2(1/8 inch)
Size ratio up to grade (%) ≥98 ≥98 ≥96 ≥96
Bulk density (g/ml) ≥0.68 ≥0.68 ≥0.65 ≥0.65
Wear ratio (%) ≤0.20 ≤0.20 ≤0.40 ≤0.40
Crushing strength (N) ≥35/piece ≥85/piece ≥25/piece ≥65/piece
Static H2O adsorption (%) ≥25 25 25 25
Static CO2  adsorption (‰) ≥17 17 17 17
Water content (%) ≤1.5 ≤1.5 ≤1.5 ≤1.5
Typical Chemical Formula

Na2O. Al2O3. (2.8±0.2) SiO2. (6~7)H2O  (SiO2 : Al2O3 ≈2.6-3.0)

Typical Application

a) Removal of H2O from air fro air cryo-separation application
b) Removal of CO2 and moisture from air (air pre-purification) and other gases.
c) Separation of enriched oxygen from air.
d) For desulfurization aerosol propellant deodorant
e) For natural gas, liquefied petroleum gas, liquid paraffin (propane, butane) dehydration and desulphurization (removal of hydrogen sulfide and mercaptan).
f)  Catalyst protection, removal of oxygenates from hydrocarbons (olefin streams)

g) Removal of n-chained compositions from aromatics.

h) Production of bulk oxygen in PSA units.

i) Production of medical oxygen in small scale oxygen concentrators.

Warranty:

a) By National Standard HG-T_2690-2012

b) Offer lifetime consultation on problems occurred


Regeneration:
Chemxin molecular sieve Type 13X can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes.
To remove moisture from a 13X molecular sieve, a temperature of 250-300°C is required. A properly regenerated molecular sieve can give moisture dew points below -100°C, or mercaptans or CO2 levels below 2 ppm.
The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process.
Size:
13X - Zeolite are available in beads of 1-2 mm(10x18 mesh), 2-3 mm(8x12 mesh), 2.5-5 mm(4x8 mesh) and as powder, and in pellet 1.6mm, 3.2mm.

Attention:
To avoid damp and pre-adsorption of organic before running, or must to be reactivated.


Chemxin 13X Type Molecular Sieve Zeolite Adsorbent For Dehydration and Desulfurization of LPG Streams

Chemxin 13X Type Molecular Sieve Zeolite Adsorbent For Dehydration and Desulfurization of LPG Streams

Production&Packaging

Chemxin 13X Type Molecular Sieve Zeolite Adsorbent For Dehydration and Desulfurization of LPG Streams  

Company Information

Chemxin 13X Type Molecular Sieve Zeolite Adsorbent For Dehydration and Desulfurization of LPG Streams  


Chemxin 13X Type Molecular Sieve Zeolite Adsorbent For Dehydration and Desulfurization of LPG Streams  



Chemxin 13X Type Molecular Sieve Zeolite Adsorbent For Dehydration and Desulfurization of LPG Streams  

Contact Us

Chemxin 13X Type Molecular Sieve Zeolite Adsorbent For Dehydration and Desulfurization of LPG Streams  

Previous: 
Next: 

Product Category

Contact Us

Add : 4F, Changshanghui Building, No.31 Shengxing Street, Panyu District, Guangzhou city, Guangdong province, 511400 China

Tel : +86-20-39185057
 
Hand phone:+86-13538980736

E-mail : info@chemxin.com

Skype : xintao08

CHEMXIN

Adsorbent Specialist for 20 years
Best Adsorption Solution for You Only

PRODUCTS

CONTACT US

  Address:4F, Changshanghui Building, No. 31 Shengxing Street, Panyu District, Guangzhou City, Guangdong Province, 511400 China
  Tel:+86-20-39185057
  Phone: +86-13538980736
  E-mail:info@chemxin.com
Copyright 2022 Guangzhou Chemxin Environmental Material Co.,Ltd. Support by Leadong. Sitemap